2.5” Borehole Pump–2.5SDM Series Deep Well Submersible Pump
2.5SDM series
≋ 2.5SDM Submersible Deep Well Pump
∿ We provide a wide range of deep well submersible pumps from 2” to 10” which are designed for transferring water from wells, ponds, lakes and cisterns.
◍ 2.5SDM series are suitable for wells over φ65mm
✓ Reliable Structure for Continuous Water Delivery
★ Stainless Steel Shaft • Efficient Motor • Built to Last
Product Description
2.5SDM deep well submersible pump is used to pump water from drilled deep wells, borehole wells, ponds, and lakes. Ideal for sprinkler lawn irrigation, elevated and cistern tanks filling, water fountains, industrial and farming water supply, and agricultural irrigation.
Operation Coditions
Maximum liquid temperature +35 °C
Maximum sand content:0.25%
Maximum immersion depth of 60 m
Minimum well diameter:2.5‘’
Installation: vertical
Features
Rewindable oil-filled motor 50/60Hz
Food degree mechanical oil
Insulation: class F
Protection: IP 68
| Components | Material |
|---|---|
| Pump external casing | AISI304 SS |
| Delivery casing | Cast-Cu ASTM C85500 |
| Suction lantern | Cast-Cu ASTM C85500 |
| Diffuser | Plastic. PC |
| Impeller | Plastic. POM |
| Shaft | AISI304 SS |
| Shaft coupling | AISI304 SS |
| Wear ring | AISI304 SS |
| Motor external casing | AISI304 SS |
| Top chock | Cast-iron |
| Cast-Cu | |
| Bottom support | AISI304SS |
| Mechanical seal | Special seal for deep well (Graphite-Ceramic/TC) |
| Shaft | AISI304 |
| Seal lubricant oil | Oil for food machinery and pharmaceutic use |
Optional Available On Request
Top chuck is available with brass
Delivery casing, Inlet parts are available SS304
Other voltages or frequency 60Hz
Single phase motor with built-in capacitor
Performance Curve
